IS62WV10248DBLL-55MI-TR

Org 1Mx8
Pkg(Pins) BGA
Vcc 1.65-3.6V
Solder SnPb
Status Prod
Comment IS62WV10248BLL
Die Rev D
Outpack Tape on Reel
Speed(ns) 55
Temp.Range Industrial Grade (-40C to +85°C)
Voltage Range 2.2V (2.4V/2.5V) to 3.6V
Product Family 62 = Low Power
Voltage Range BLL = 2.5V to 3.6V
Temp. Grade I = Industrial Grade (-40°C to +85°C)
Solder Type blank = SnPb
Revision D = D
Number Of Words 1024 = 1024K
Speed 55 = 55NS
Bit Org 8 = x8
Operating Voltage WV = Wide Voltage Range
Package Code M = BGA

IS62WV10248DBLL-55MI-TR Features

  • High-speed access time: 45ns, 55ns
  • CMOS low power operation
    • 30 mW (typical) operating
    • 12 µW (typical) CMOS standby
  • TTL compatible interface levels
  • Single power supply
    • 1.65V--2.2V Vdd (62/65WV10248dALL)
    • 2.4V--3.6V Vdd (62/65WV10248dBLL)
  • Fully static operation: no clock or refresh required
  • Three state outputs
  • Data control for upper and lower bytes
  • Automotive temperature (-40oC to +125oC)

Overview

The ISSI IS62WV10248DALL/ IS62WV10248DBLL are high-speed, 8M bit static RAMs organized as 1M words by 8 bits. It is fabricated using ISSI's high-performance CMOS technology. This highly reliable process coupled with innovative circuit design techniques, yields high- performance and low power consumption devices. When CS1 is HIGH (deselected) or when CS2 is LOW (deselected), the device assumes a standby mode at which the power dissipation can be reduced down with CMOS input levels. Easy memory expansion is provided by using Chip Enable and Output Enable inputs. The active LOW Write Enable (WE) controls both writing and reading of the memory. The IS62WV10248DALL and IS62WV10248DBLL are packaged in the JEDEC standard 48-pin mini BGA (9mm x 11mm) and 44-Pin TSOP (TYPE II).