IS25LP064D-BJLA3-TR

Buy
Density	64M
Vcc	2.3-3.6V
Type	Multi I/O SPI, QPI, DTR
Status	Prod
Frequency	80M/166Mhz
Temp Range	-40 to 125°C
Package Type	SOIC, WSON, USON, XSON, TFBGA
Alt Version Doc	IS25LP064A
Density	064 = 64M
Operating Voltage Range	L = 2.3-3.6V
Rev Control	D = D
Product Family	P = Single/Dual/Quad/QPI SPI DTR Options Available
Outpack	Tape on Reel

Buy

Density

64M

Vcc

2.3-3.6V

Type

Multi I/O SPI, QPI, DTR

Status

Prod

Frequency

80M/166Mhz

Temp Range

-40 to 125°C

Package Type

SOIC, WSON, USON, XSON, TFBGA

Alt Version Doc

IS25LP064A

Density

064 = 64M

Operating Voltage Range

L = 2.3-3.6V

Rev Control

D = D

Product Family

P = Single/Dual/Quad/QPI SPI DTR Options Available

Outpack

Tape on Reel

IS25LP064D-BJLA3-TR Features

Industry Standard Serial Interface
Low Power with Wide Temp. Ranges - IS25LP064D: 64Mbit/8Mbyte - Single Voltage Supply - IS25WP064D: 64Mbit/8Mbyte IS25LP: 2.30V to 3.60V - Supports Standard SPI, Fast, Dual, Dual IS25WP: 1.65V to 1.95V I/O, Quad, Quad I/O, SPI DTR, Dual I/O - 10 mA Active Read Current DTR, Quad I/O DTR, and QPI - 8 µA Standby Current - 1 µA Deep Power Down - Software & Hardware Reset - Temp Grades: - Supports Serial Flash Discoverable Extended: -40°C to +105°C Parameters (SFDP) Auto Grade (A3) : -40°C to +125°C
High Performance Serial Flash (SPI)
Advanced Security Protection - 80MHz Normal Read - Software and Hardware Write Protection - Up to166Mhz Fast Read - Advanced Sector/Block Protection - Up to 80MHz DTR (Dual Transfer Rate) - Top/Bottom Block Protection - Equivalent Throughput of 664 Mb/s - Power Supply Lock Protection - Selectable Dummy Cycles - 4x256 Byte Dedicated Security Area - Configurable Drive Strength with OTP User-lockable Bits - Supports SPI Modes 0 and 3 - 128 bit Unique ID for Each Device - More than 100,000 Erase/Program Cycles (Call Factory) - More than 20-year Data Retention
Industry Standard Pin-out & Packages(1)
Flexible & Efficient Memory Architecture - M =16-pin SOIC 300mil - Chip Erase with Uniform Sector/Block - B = 8-pin SOIC 208mil Erase (4/32/64 Kbyte) - E = 8-contact XSON 4x4mm - Program 1 to 256 Byte per Page - K = 8-contact WSON 6x5mm - Program/Erase Suspend & Resume - L = 8-contact WSON 8x6mm - J = 8-contact WSON 8x6mm (2)

Overview

The IS25LP064D and IS25WP064D Serial Flash memory offers a versatile storage solution with high flexibility and performance in a simplified pin count package. ISSI’s “Industry Standard Serial Interface” Flash is for systems that require limited space, a low pin count, and low power consumption. The device is accessed through a 4-wire SPI Interface consisting of a Serial Data Input (SI), Serial Data Output (SO), Serial Clock (SCK), and Chip Enable (CE#) pins, which can also be configured to serve as multi-I/O (see pin descriptions).

Description

Stock Qty

Available Qty

Description

Stock Qty

Available Qty