1. ISSI
  2. Flash
  3. Flash
  4. Serial NOR (QSPI, SPI)
  5. 1.70-1.95V
  6. 2M
  7. 8 pin SOIC 208mil
  8. IS25WP020E-JBLE-TR

  IS25WP020E-JBLE-TR

Datasheet
Get Quote
Buy
Density 2M
Vcc 1.70-1.95V
Type Multi I/O Quad SPI
Status Prod
Frequency 50M/104Mhz
Temp Range -40 to 125°C
Package Type SOIC, USON
Alt Version Doc IS25WD020, IS25WQ020
Temperature Grade E = Extended grade (-40°C to +105°C)
Lead Free Package L = Lead-Free (Pb Free) and Halogen Free
Density 020 = 2M
Special Options J = Standard
Operating Voltage Range W = 1.65-1.95V
Rev Control E = E
Package Type B = 8 pin SOIC 208mil
Product Family P = Single/Dual/Quad/QPI SPI DTR Options Available
Outpack Tape on Reel
Datasheet
Get Quote

IS25WP020E-JBLE-TR Features

  • Industry Standard Serial Interface
  • Low Power with Wide Temp. Ranges - IS25LP040E: 4Mbit/512Kbyte - Single Voltage Supply: - IS25WP040E: 4Mbit/512Kbyte IS25LP: 2.30V to 3.60V - IS25LP020E: 2Mbit/256Kbyte IS25WP: 1.70V to 1.95V - IS25WP020E: 2Mbit/256Kbyte - 6 mA Active Read Current - IS25LP010E: 1Mbit/128Kbyte - 17 µA Standby Current - IS25WP010E: 1Mbit/128Kbyte - 3 µA Deep Power Down - Temp Grades: - IS25LP512E: 512Kbit/64Kbyte Extended: -40°C to +105°C - IS25WP512E: 512Kbit/64Kbyte Auto Grade (A3): -40°C to +125°C - IS25LP025E: 256Kbit/32Kbyte - IS25WP025E: 256Kbit/32Kbyte - 256 bytes per Programmable Page
  • Advanced Security Protection - Supports standard SPI, Multi-I/O SPI, and - Software and Hardware Write Protection QPI - Power Supply Lock Protect - Supports Serial Flash Discoverable - 4x256-Byte Dedicated Security Area Parameters (SFDP) with OTP User-lockable Bits - 128 bit Unique ID for Each Device
  • High Performance Serial Flash (SPI) (Call Factory) - 50MHz Normal and 104Mhz Fast Read
  • Industry Standard Pin-out & Packages(1) - 416 MHz equivalent QPI - Supports SPI Modes 0 and 3 - B = 8-pin SOIC 208mil (Call Factory) - More than 100,000 Erase/Program Cycles - N = 8-pin SOIC 150mil - More than 20-year Data Retention - D = 8-pin TSSOP (Call Factory) - V = 8-pin VVSOP 150mil (Call Factory)
  • Flexible & Efficient Memory Architecture - K = 8-contact WSON 6x5mm (Call Factory) - Y = 8-contact USON 2x3mm - Chip Erase with Uniform Sector/Block - KGD (Call Factory) Erase (4/32/64 Kbyte) - Program 1 to 256 Bytes per Page Note: - Program/Erase Suspend & Resume 1. Call Factory for other package - Soft RESET & In-Band RESET

Overview

The IS25LP/WP040E/020E/010E/512E/025E and Serial Flash memory offers a versatile storage solution with high flexibility and performance in a simplified pin count package. ISSI’s “Industry Standard Serial Interface” Flash is for systems that require limited space, a low pin count, and low power consumption. The device is accessed through a 4-wire SPI Interface consisting of a Serial Data Input (SI), Serial Data Output (SO), Serial Clock (SCK), and Chip Enable (CE#) pins, which can also be configured to serve as multi-I/O (see pin descriptions).

 

Related Part Number(s)

Description Stock Qty Available Qty Description Stock Qty Available Qty
IS25WP020E-JBLE IS25WP020E-JYLE
IS25WP020E IS25WP020E-JYLE-TR
IS25WP020E-JNLE IS25WP020E-TR
IS25WP020E-JNLE-TR