IS25WP256E-TR

Buy
Density	256M
Vcc	1.7-1.95V
Type	Multi I/O SPI, QPI, DTR
Status	Prod
Frequency	80M/166Mhz
Temp Range	-40 to 125°C
Package Type	SOIC, WSON, TFBGA
Alt Version Doc	IS25WP256D
Density	256 = 256M
Operating Voltage Range	W = 1.65-1.95V
Rev Control	E = E
Product Family	P = Single/Dual/Quad/QPI SPI DTR Options Available
Outpack	Tape on Reel

Buy

Density

256M

Vcc

1.7-1.95V

Type

Multi I/O SPI, QPI, DTR

Status

Prod

Frequency

80M/166Mhz

Temp Range

-40 to 125°C

Package Type

SOIC, WSON, TFBGA

Alt Version Doc

IS25WP256D

Density

256 = 256M

Operating Voltage Range

W = 1.65-1.95V

Rev Control

E = E

Product Family

P = Single/Dual/Quad/QPI SPI DTR Options Available

Outpack

Tape on Reel

IS25WP256E-TR Features

Industry Standard Serial Interface
Low Power with Wide Temp. Ranges - IS25LP256E: 256Mbit/32Mbyte - Single Voltage Supply - IS25WP256E: 256Mbit/32Mbyte IS25LP: 2.30V to 3.60V - 3 or 4 Byte Addressing Mode IS25WP: 1.70V to 1.95V - Supports Standard SPI, Fast, Dual, Dual - 7 mA Active Read Current I/O, Quad, Quad I/O, SPI DTR, Dual I/O - 10 µA Standby Current - 1 µA Deep Power Down DTR, Quad I/O DTR, and QPI - Temp Grades: - Software & Hardware Reset Extended: -40°C to +105°C - Supports Serial Flash Discoverable Auto Grade (A3): -40°C to +125°C Parameters (SFDP)
Advanced Security Protection
High Performance Serial Flash (SPI) - Software and Hardware Write Protection - 50MHz Normal Read - Advanced Sector/Block Protection - Up to166Mhz Fast Read (4) - Top/Bottom Block Protection - Up to 80MHz DTR (Dual Transfer Rate) - Power Supply Lock Protection - Equivalent Throughput of 664 Mb/s - 4x256 Byte Dedicated Security Area - Selectable Dummy Cycles with OTP User-lockable Bits - Configurable Drive Strength - 128 bit Unique ID for Each Device - Supports SPI Modes 0 and 3 (Call Factory) - More than 100,000 Erase/Program Cycles - More than 20-year Data Retention
Industry Standard Pin-out & Packages(1) - M =16-pin SOIC 300mil
Flexible & Efficient Memory Architecture - L = 8-contact WSON 8x6mm - Chip Erase with Uniform Sector/Block - J = 8-contact WSON 8x6mm (3) Erase (4/32/64KB or 4/32/256 KB)(2) - G = 24-ball TFBGA 6x8mm (4x6 ball array) - Program 1 to 256 or 512 Byte per Page(2) - H = 24-ball TFBGA 6x8mm (5x5 ball array) - Program/Erase Suspend & Resume - KGD (Call Factory)

Overview

The IS25LP256E and IS25WP256E Serial Flash memory offers a versatile storage solution with high flexibility and performance in a simplified pin count package. ISSI’s “Industry Standard Serial Interface” Flash is for systems that require limited space, a low pin count, and low power consumption. The device is accessed through a 4-wire SPI Interface consisting of a Serial Data Input (SI), Serial Data Output (SO), Serial Clock (SCK), and Chip Enable (CE#) pins, which can also be configured to serve as multi-I/O (see pin descriptions).

Description

Stock Qty

Available Qty

Description

Stock Qty

Available Qty