IS32FL3740

Status Prod
Vdd(V) 2.7~5.5
Channels 3x4, 12
Document Eval Board, Arduino
RGB Group 4
Pkg-Pin(mm) eTSSOP-20
Ctrl. Interface I2C - 1MHz
Special Features Independent LED control (PWM, Open/Short)
Product Family 32 = Automotive Analog and Mixed Signal
Part Number 3740 = 3740
Product Type FL = FxLED Driver
Package option blank = Tray or Tube

IS32FL3740 Features

  • Supply voltage range: 2.7V to 5.5V
  • 4 current source outputs for row control
  • 3 switch current inputs for column scan control
  • Up to 12 LEDs (3×4) in dot matrix
  • Programmable 3×4 (4 RGBs) matrix size with de- ghost function
  • 1MHz I2C-compatible interface
  • Selectable 3 Auto Breath Modes for each dot
  • Auto breath loop features interrupt pin inform MCU auto breath loop completed
  • Auto breath offers128 steps gamma current, interrupt and state lookup registers Individual on/off control Individual 1024 PWM control steps Individual Auto Breath Mode select Individual open and short error detect function
  • 256 steps global current setting
  • Cascade for synchronization of chips
  • eTSSOP-20 package
  • AEC-Q100 Qualified
  • Automotive clusters
  • Dashboards

Overview

The IS32FL3740 is a general purpose 3×4 LEDs matrix driver with 1/12 cycle rate. The device can be programmed via an I2C compatible interface. Each LED can be dimmed individually with 8-bit × 8 PWM data which allowing 1024 steps of linear dimming. IS32FL3740 features 3 Auto Breathing Modes which are noted as ABM-1, ABM-2 and ABM-3. For each Auto Breathing Mode, there are 4 timing characters which include current rising / holding / falling / off time and 3 loop characters which include Loop-Beginning / Loop-Ending / Loop-Times. Every LED can be configured to be any Auto Breathing Mode or No- Breathing Mode individually. Additionally each LED open and short state can be detected, IS32FL3740 store the open or short information in Open-Short Registers. The Open-Short Registers allowing MCU to read out via I2C compatible interface. Inform MCU whether there are LEDs open or short and the locations of open or short LEDs. The IS32FL3740 operates from 2.7V to 5.5V and features a very low shutdown and operational current. IS32FL3740 is available in eTSSOP-20 package. It operates from 2.7V to 5.5V over the temperature range of -40°C to +125°C.

 

Related Part Number(s)

Description Stock Qty Available Qty
IS32FL3740-ZLA3-TR