IS31LT3380-GRLS3-TR

IOUT 1.2A±5%
Status Prod
Vdd(V) 8.5-40
Pkg Pin SOP-8
Document MR16_EB
Driver Type DC/DC, Step-down
Efficiency(%) 98
Power Transistor Built-in
Package Type GR = SOP
Solder Type L = Lead-free (RoHS Compliant)
Product Family 31 = Commercial/Industrial Analog
Part Number 3380 = 3380
Product Type LT = Lighting LED Driver
Temperature Grade S3 = Industrial temp. (-40°C to 105°C)
Package option TR = Tape & Reel
Outpack Tape on Reel

IS31LT3380-GRLS3-TR Features

  • Multi-modes switch dimming
  • Up to 1.2A output current
  • High efficiency (up to 98%)
  • Wide input voltage range: 8.5V to 40V
  • Simple low parts count
  • Typical 5% output current accuracy
  • Up to 1MHz switching frequency
  • Thermal shutdown protection circuitry
  • SOP8 package
  • MR16, MR11 LED spotlight
  • LED street lighting
  • PAR LED bulb

Overview

The IS31LT3380 is a continuous mode inductive step-down converter, designed for driving a single LED or multiple series connected LEDs efficiently from a voltage source higher than the LED voltage. The chip operates from an input voltage between 8.5V and 40V and provides an output current up to 1.2A. The IS31LT3380 includes a high-side output current sensing circuit, which uses an external resistor to set the nominal average output current. The IS31LT3380 includes an integrated output switch which has a very low conducting impedance to ensure high system efficiency. The IS31LT3380 has switch dimming function. The chip detects external switch action to adjust output current, allowing for dimming functionality to be achieved without changing the original lighting system circuitry. The switch dimming is implemented in either two-level mode or three-level mode. The output current of every level and the total number of levels are customer selected by setting the corresponding input conditions of DIM1 and DIM2 pin. The output current is set at the initial value the first time that power is supplied to the chip. After the initial power up sequence, the chip adjusts the output current according to the external switch action. After the lowest current level, the current cycles back to the initial value if more switch action is detected. If the power is switched off for longer than 2 seconds, the device will return to it’s initial state, and the output current will be set to the initial value at the next time that power is applied.

 

Related Part Number(s)

Description Stock Qty Available Qty
IS31LT3380