IS46LD32800B-3BLA1-TR

Density 256Mb
Org 8Mx32
Vcc 1.2/1.8V
Type LPDDR2
Refresh 4K
Status Prod
Pkg Pins BGA(134), PoP(168)
Speed Mhz 533, 400, 333
Comment Previous Rev IS43/46LD32800A
Temp. Grade A1 = Automotive Grade (-40°C to +85°C)
Solder Type L = SnAgCu
Generation B = B
Number Of Words 800 = 8M
Speed 3 = 333MHz
Operating Voltage Range LD = 1.2V - 1.8V LPDDR2
Bus Width 32 = x32
Package Type B = BGA
Product Family 46 = DDR/DDR2/DDR3/DDR4 Automotive grade
Outpack Tape on Reel

IS46LD32800B-3BLA1-TR Features

  • Low-voltage Core and I/O Power Supplies VDD2 = 1.14-1.30V, VDDCA/VDDQ = 1.14-1.30V, VDD1 = 1.70-1.95V
  • High Speed Un-terminated Logic(HSUL_12) I/O Interface
  • Clock Frequency Range : 10MHz to 533MHz (data rate range : 20Mbps to 1066Mbps per I/O)
  • Four-bit Pre-fetch DDR Architecture
  • Multiplexed, double data rate, command/ad- dress inputs
  • Four internal banks for concurrent operation
  • Bidirectional/differential data strobe per byte of data (DQS/DQS#)
  • Programmable Read/Write latencies(RL/WL) and burst lengths(4,8 or 16)
  • ZQ Calibration
  • On-chip temperature sensor to control self re- fresh rate
  • Partial
    • array self refresh(PASR)
  • Deep power-down mode(DPD)
  • Operation Temperature Commercial (TC = 0°C to 85°C) Industrial (TC = -40°C to 85°C) Automotive, A1 (TC = -40°C to 85°C) Automotive, A2 (TC = -40°C to 105°C) options

Overview

Clock: CK and CK# are differential clock inputs. All Double Data Rate (DDR) CA inputs are sampled on both positive and negative edge of CK. Single Data Rate (SDR) inputs, CS# and CKE, are sampled at the positive Clock edge. Clock is defined as the differential pair, CK and CK#. The positive Clock edge is defined by the crosspoint of a rising CK and a falling CK#. The negative Clock edge is defined by the crosspoint of a falling CK and a rising CK#. Clock Enable: CKE HIGH activates and CKE LOW deactivates internal clock signals and therefore device input buffers and output drivers. Power savings modes are entered and exited through CKE transitions. CKE is considered part of the command code. See Command Truth Table for command code descriptions. CKE is sampled at the positive Clock edge. Chip Select: CS# is considered part of the command code. See Command Truth Table for command code descriptions. CS# is sampled at the positive Clock edge. DDR Command/Address Inputs: Uni-directional command/address bus inputs. CA is considered part of the command code. See Command Truth Table for command code descriptions. Data Inputs/Output: Bi-directional data bus.

 

Related Part Number(s)

Description Stock Qty Available Qty Description Stock Qty Available Qty
IS46LD32800B-3BLA1 37 IS46LD32800B-18BPLA1-TR
IS43LD32800B-18BL IS46LD32800B-18BPLA2
IS43LD32800B-18BL-TR IS46LD32800B-18BPLA2-TR
IS43LD32800B-18BLI IS46LD32800B-25BLA1
IS43LD32800B-18BLI-TR IS46LD32800B-25BLA1-TR
IS43LD32800B-25BL IS46LD32800B-25BLA2 2
IS43LD32800B-25BL-TR IS46LD32800B-25BLA2-TR
IS43LD32800B-25BLI IS46LD32800B-25BPLA1
IS43LD32800B-25BLI-TR IS46LD32800B-25BPLA1-TR
IS43LD32800B-3BL IS46LD32800B-25BPLA2 7
IS43LD32800B-3BL-TR IS46LD32800B-25BPLA2-TR
IS43LD32800B-3BLI 10 IS46LD32800B-3BLA2
IS43LD32800B-3BLI-TR IS46LD32800B-3BLA2-TR
IS46LD32800B-18BLA1 IS46LD32800B-3BPLA1 15
IS46LD32800B-18BLA1-TR IS46LD32800B-3BPLA1-TR
IS46LD32800B-18BLA2 IS46LD32800B-3BPLA2
IS46LD32800B-18BLA2-TR IS46LD32800B-3BPLA2-TR
IS46LD32800B-18BPLA1