IS25LP064D-QJLE-TR

Buy
容量 64M
電壓 2.3-3.6V
類型 Multi I/O SPI, QPI, DTR
狀態 Prod
频率 80M/166Mhz
溫度範圍 -40 to 125°C
腳位類型 SOIC, WSON, USON, XSON, TFBGA
替代版本文件 IS25LP064A
容量 064 = 64M
工作電壓範圍 L = 2.3-3.6V
Rev Control D = D
產品系列 P = Single/Dual/Quad/QPI SPI DTR Options Available
外包裝 Tape on Reel

IS25LP064D-QJLE-TR 特徵

  • Industry Standard Serial Interface
  • Low Power with Wide Temp. Ranges - IS25LP064D: 64Mbit/8Mbyte - Single Voltage Supply - IS25WP064D: 64Mbit/8Mbyte IS25LP: 2.30V to 3.60V - Supports Standard SPI, Fast, Dual, Dual IS25WP: 1.65V to 1.95V I/O, Quad, Quad I/O, SPI DTR, Dual I/O - 10 mA Active Read Current DTR, Quad I/O DTR, and QPI - 8 µA Standby Current - 1 µA Deep Power Down - Software & Hardware Reset - Temp Grades: - Supports Serial Flash Discoverable Extended: -40°C to +105°C Parameters (SFDP) Auto Grade (A3) : -40°C to +125°C
  • High Performance Serial Flash (SPI)
  • Advanced Security Protection - 80MHz Normal Read - Software and Hardware Write Protection - Up to166Mhz Fast Read - Advanced Sector/Block Protection - Up to 80MHz DTR (Dual Transfer Rate) - Top/Bottom Block Protection - Equivalent Throughput of 664 Mb/s - Power Supply Lock Protection - Selectable Dummy Cycles - 4x256 Byte Dedicated Security Area - Configurable Drive Strength with OTP User-lockable Bits - Supports SPI Modes 0 and 3 - 128 bit Unique ID for Each Device - More than 100,000 Erase/Program Cycles (Call Factory) - More than 20-year Data Retention
  • Industry Standard Pin-out & Packages(1)
  • Flexible & Efficient Memory Architecture - M =16-pin SOIC 300mil - Chip Erase with Uniform Sector/Block - B = 8-pin SOIC 208mil Erase (4/32/64 Kbyte) - E = 8-contact XSON 4x4mm - Program 1 to 256 Byte per Page - K = 8-contact WSON 6x5mm - Program/Erase Suspend & Resume - L = 8-contact WSON 8x6mm - J = 8-contact WSON 8x6mm (2)

概觀

The IS25LP064D and IS25WP064D Serial Flash memory offers a versatile storage solution with high flexibility and performance in a simplified pin count package. ISSI’s “Industry Standard Serial Interface” Flash is for systems that require limited space, a low pin count, and low power consumption. The device is accessed through a 4-wire SPI Interface consisting of a Serial Data Input (SI), Serial Data Output (SO), Serial Clock (SCK), and Chip Enable (CE#) pins, which can also be configured to serve as multi-I/O (see pin descriptions).

 

相關IC编號

IC 編號 庫存數量 可用數量 IC 編號 庫存數量 可用數量
IS25LP064D IS25LP064D-JGLA3-TR
IS25LP064D-BBLA3 IS25LP064D-JGLE
IS25LP064D-BBLA3-TR IS25LP064D-JGLE-TR
IS25LP064D-BBLE IS25LP064D-JHLA3
IS25LP064D-BBLE-TR IS25LP064D-JHLA3-TR
IS25LP064D-BELA3 IS25LP064D-JHLE
IS25LP064D-BELA3-TR IS25LP064D-JHLE-TR
IS25LP064D-BELE IS25LP064D-JKLA3
IS25LP064D-BELE-TR IS25LP064D-JKLA3-TR
IS25LP064D-BKLA3 IS25LP064D-JKLE
IS25LP064D-BKLA3-TR IS25LP064D-JKLE-TR
IS25LP064D-BKLE IS25LP064D-JLLA3
IS25LP064D-BKLE-TR IS25LP064D-JLLA3-TR
IS25LP064D-BLLA3 IS25LP064D-JLLE
IS25LP064D-BLLA3-TR IS25LP064D-JLLE-TR
IS25LP064D-BLLE IS25LP064D-JMLA3
IS25LP064D-BLLE-TR IS25LP064D-JMLA3-TR
IS25LP064D-JBLA3 IS25LP064D-JMLE
IS25LP064D-JBLA3-TR IS25LP064D-JMLE-TR
IS25LP064D-JBLE IS25LP064D-QBLA3
IS25LP064D-JBLE-TR IS25LP064D-QBLA3-TR
IS25LP064D-JELA3 IS25LP064D-QBLE
IS25LP064D-JELA3-TR IS25LP064D-QBLE-TR
IS25LP064D-JELE IS25LP064D-QKLA3
IS25LP064D-JELE-TR IS25LP064D-TR
IS25LP064D-JGLA3
顯示全部 (78)