| 容量 | 8M |
|---|---|
| 規格 | 1Mx8 |
| 電壓 | 1.65-3.6V |
| 狀態 | S=NOW |
| 腳位數 | TSOP2(44), BGA(48) |
| 速度Ns | 45, 55 |
| 評論上一篇 | |
| 電壓範圍 | BLL = 2.5V to 3.6V |
| 温度等级 | A3 = Automotive Grade (-40°C to +125°C) |
| 焊料類型 | L = Lead-free (ROHS Compliant) |
| Revision | H = H |
| 字數 | 1024 = 1024K |
| 速度 | 55 = 55NS |
| Bit Org | 8 = x8 |
| 產品系列 | 65 = Automotive Low Power |
| Operating Voltage | WV = Wide Voltage Range |
| 包裝代碼 | B = BGA |
| 外包裝 | Tape on Reel |
SRAM is one of random access memories. SRAM has three different modes supported. Each function is described below with Truth Table. STANDBY MODE Device enters standby mode when deselected (CS1# HIGH or CS2 LOW). The input and output pins (I/O0-7) are placed in a high impedance state. CMOS input in this mode will maximize saving power. WRITE MODE Write operation issues with Chip selected (CS1# LOW and CS2 HIGH) and Write Enable (WE#) input LOW. The input and output pins (I/O0-7) are in data input mode. Output buffers are closed during this time even if OE# is LOW. READ MODE Read operation issues with Chip selected (CS1# LOW and CS2 HIGH) and Write Enable (WE#) input HIGH. When OE# is LOW, output buffer turns on to make data output. Any input to I/O pins during READ mode is not permitted. In the READ mode, output buffers can be turned off by pulling OE# HIGH. In this mode, internal device operates as READ but I/Os are in a high impedance state. Since device is in READ mode, active current is used. TRUTH TABLE.