IS43R32400E-5BLI

可提供
生產年份 數量
1,890
容量 128M
規格 4Mx32
電壓 2.5V
類型 DDR
刷新 4K
速度 5 = 200MHz
狀態 Prod
評注
腳位數 BGA(144)
工作電壓範圍 R = 2.5V DDR or 2.5V SDR
字數 400 = 4M
腳位/封裝 B = BGA
Generation E = E
温度等级 I = Industrial Grade (-40C to +85°C)
焊料類型 L = SnAgCu
總線寬度 32 = x32
產品系列 43 = DDR/DDR2/DDR3/DDR4 Commercial/Industrial grade
可提供
生產年份 數量
1,890

IS43R32400E-5BLI 特徵

  • VDD and VDDQ: 2.5V ± 0.2V (-5,-6)
  • VDD and VDDQ: 2.5V ± 0.1V (-4)
  • SSTL_2 compatible I/O
  • Double-data rate architecture; two data transfers per clock cycle
  • Bidirectional, data strobe (DQS) is transmitted/ received with data, to be used in capturing data at the receiver
  • DQS is edge-aligned with data for READs and centre-aligned with data for WRITEs
  • Differential clock inputs (CK and CK)
  • DLL aligns DQ and DQS transitions with CK transitions
  • Commands entered on each positive CK edge; data and data mask referenced to both edges of DQS
  • Four internal banks for concurrent operation
  • Data Mask for write data. DM masks write data at both rising and falling edges of data strobe
  • Burst Length: 2, 4 and 8
  • Burst Type: Sequential and Interleave mode
  • Programmable CAS latency: 2, 2.5, 3, and 4
  • Auto Refresh and Self Refresh Modes
  • Auto Precharge
  • Tras Lockout supported (trap = trcd) OPTIONS
  • Configuration(s): 4Mx32, 8Mx16
  • Package(s): 144 Ball BGA (x32) 66-pin TSOP-II (x16) and 60 Ball BGA (x16)
  • Lead-free package available

概觀

ISSI’s 128-Mbit DDR SDRAM achieves high speed data transfer using pipeline architecture and two data word accesses per clock cycle. The 134,217,728-bit memory array is internally organized as four banks of 32Mb to allow concurrent operations. The pipeline allows Read and Write burst accesses to be virtually continuous, with the option to concatenate or truncate the bursts. The programmable features of burst length, burst sequence and CAS latency enable further advantages. The device is available in 16-bit and 32-bit data word size Input data is registered on the I/O pins on both edges of Data Strobe signal(s), while output data is referenced to both edges of Data Strobe and both edges of CLK. Commands are registered on the positive edges of CLK. An Auto Refresh mode is provided, along with a Self Refresh mode. All I/Os are SSTL_2 compatible. ADDRESS TABLE Parameter 4M x 32 1M x 32 x 4 Configuration banks BA0, BA1.

 

相關IC编號

IC 編號 庫存數量 可用數量 IC 編號 庫存數量 可用數量
IS43R32400E-5BLI-TR 1,500 IS43R32400E-6BL
IS43R32400E-4BL 257 1,890 IS43R32400E-6BL-TR
IS43R32400E-4BL-TR 1,500 IS43R32400E-6BLI
IS43R32400E-5BL 1,083 109 IS43R32400E-6BLI-TR
IS43R32400E-5BL-TR 1,500