IS25LP128F-JBLA3

容量 128M
電壓 2.3-3.6V
類型 Multi I/O SPI, QPI, DTR
狀態 Prod
频率 80M/166Mhz
溫度範圍 -40 to 125°C
腳位類型 SOIC, WSON, TFBGA
替代版本文件
特殊選擇 J = Standard
工作電壓範圍 L = 2.3-3.6V
Rev Control F = F
腳位/封裝 B = 8 pin SOIC 208mil
產品系列 P = Single/Dual/Quad/QPI SPI DTR Options Available
Temperature Grade A3 = Automotive grade (-40°C to +125°C)
無鉛封裝 L = Lead-Free (Pb Free) and Halogen Free
容量 128 = 128M

IS25LP128F-JBLA3 特徵

  • Industry Standard Serial Interface
  • Low Power with Wide Temp. Ranges
  • - Single Voltage Supply IS25LP: 2.30V to 3.60V IS25WP: 1.65V to 1.95V - 10 mA Active Read Current - 8 µA Standby Current - 1 µA Deep Power Down - Temp Grades: Extended: -40°C to +105°C Auto Grade (A3) : -40°C to +125°C
  • Advanced Security Protection
  • - Software and Hardware Write Protection - Advanced Sector/Block Protection - Top/Bottom Block Protection - Power Supply Lock Protection - 4x256 Byte Dedicated Security Area with OTP User-lockable Bits - 128 bit Unique ID for Each Device (Call Factory)
  • Industry Standard Pin-out & Packages
  • - M =16-pin SOIC 300mil - B = 8-pin SOIC 208mil - K = 8-contact WSON 6x5mm - L = 8-contact WSON 8x6mm - G = 24-ball TFBGA (4x6 ball array) - H = 24-ball TFBGA (5x5 ball array) - KGD (Call Factory) - IS25LP128F: 128Mbit/16Mbyte - IS25WP128F: 128Mbit/16Mbyte - 3 or 4 Byte Addressing Mode - Supports Standard SPI, Fast, Dual, Dual I/O, Quad, Quad I/O, SPI DTR, Dual I/O DTR, Quad I/O DTR, and QPI - Software & Hardware Reset - Supports Serial Flash Discoverable Parameters (SFDP)
  • High Performance Serial Flash (SPI)
  • - 80MHz Normal Read - Up to166Mhz Fast Read - Up to 80MHz DTR (Dual Transfer Rate) - Equivalent Throughput of 664 Mb/s - Selectable Dummy Cycles - Configurable Drive Strength - Supports SPI Modes 0 and 3 - More than 100,000 Erase/Program Cycles - More than 20-year Data Retention
  • Flexible & Efficient Memory Architecture
  • - Chip Erase with Uniform Sector/Block Erase (4/32/64 Kbyte) - Program 1 to 256 Byte per Page - Program/Erase Suspend & Resume

概觀

The IS25LP128F and IS25WP128F Serial Flash memory offers a versatile storage solution with high flexibility and performance in a simplified pin count package. ISSI’s “Industry Standard Serial Interface” Flash is for systems that require limited space, a low pin count, and low power consumption. The device is accessed through a 4-wire SPI Interface consisting of a Serial Data Input (SI), Serial Data Output (SO), Serial Clock (SCK), and Chip Enable (CE#) pins, which can also be configured to serve as multi-I/O (see pin descriptions). The device supports Dual and Quad I/O as well as standard, Dual Output, and Quad Output SPI. Clock frequencies of up to 166MHz allow for equivalent clock rates of up to 664MHz (166MHz x 4) which equates to 83Mbytes/s of data throughput. The IS25xP series of Flash adds support for DTR (Double Transfer Rate) commands that transfer addresses and read data on both edges of the clock. These transfer rates can outperform 16-bit Parallel Flash memories allowing for efficient memory access to support XIP (execute in place) operation. The memory array is organized into programmable pages of 256 bytes. This family supports page program mode where 1 to 256 bytes of data are programmed in a single command. QPI (Quad Peripheral Interface) supports 2- cycle instruction further reducing instruction times. Pages can be erased in groups of 4Kbyte sectors, 32Kbyte blocks, 64Kbyte blocks, and/or the entire chip. The uniform sector and block architecture allows for a high degree of flexibility so that the device can be utilized for a broad variety of applications requiring solid data retention. Supply Voltage & Temperature Range vs. Maximum Speed.

 

相關IC编號

IC 編號 庫存數量 可用數量 IC 編號 庫存數量 可用數量
IS25LP128F-JBLA3-TR 2,000 IS25LP128F-JBLE 10
IS25LP128F-BBLA3 IS25LP128F-JBLE-TR 4,000
IS25LP128F-BBLA3-TR IS25LP128F-JGLA3 3,000
IS25LP128F-BBLE IS25LP128F-JGLA3-TR
IS25LP128F-BBLE-TR IS25LP128F-JGLE 3,000
IS25LP128F-BGLA3 IS25LP128F-JGLE-TR
IS25LP128F-BGLA3-TR IS25LP128F-JHLA3
IS25LP128F-BGLE IS25LP128F-JHLA3-TR
IS25LP128F-BGLE-TR IS25LP128F-JHLE
IS25LP128F-BHLA3 IS25LP128F-JHLE-TR
IS25LP128F-BHLA3-TR IS25LP128F-JKLA3 10,000
IS25LP128F-BHLE IS25LP128F-JKLA3-TR
IS25LP128F-BHLE-TR IS25LP128F-JKLE 1,000
IS25LP128F-BKLA3 IS25LP128F-JKLE-TR 40,500
IS25LP128F-BKLA3-TR IS25LP128F-JLLA3 10,000
IS25LP128F-BKLE IS25LP128F-JLLA3-TR
IS25LP128F-BKLE-TR IS25LP128F-JLLE 2,500
IS25LP128F-BLLA3 IS25LP128F-JLLE-TR 12,000
IS25LP128F-BLLA3-TR IS25LP128F-JMLA3 1,000
IS25LP128F-BLLE IS25LP128F-JMLA3-TR
IS25LP128F-BLLE-TR IS25LP128F-JMLE
IS25LP128F-BMLA3 IS25LP128F-JMLE-TR
IS25LP128F-BMLA3-TR IS25LP128F-QBLA3
IS25LP128F-BMLE IS25LP128F-QBLA3-TR
IS25LP128F-BMLE-TR IS25LP128F-QBLE
顯示全部 (84)