IS25LP512M-TMLE

容量 512M
電壓 2.3-3.6V
類型 Multi I/O SPI, QPI, DTR
狀態 Prod
频率 80M/133Mhz
溫度範圍 -40 to 125°C
腳位類型 SOIC, WSON, TFBGA
替代版本文件
工作電壓範圍 L = 2.3-3.6V
Rev Control M = M
產品系列 P = Single/Dual/Quad/QPI SPI DTR Options Available
容量 512 = 512K

IS25LP512M-TMLE 特徵

  • Industry Standard Serial Interface
  • Low Power with Wide Temp. Ranges
  • - Single Voltage Supply IS25LP: 2.30V to 3.60V IS25WP: 1.65V to 1.95V - 7 mA Active Read Current - 10 µA Standby Current - 1 µA Deep Power Down - Temp Grades: Extended: -40°C to +105°C Auto Grade (A3): -40°C to +125°C
  • Advanced Security Protection
  • - Software and Hardware Write Protection - Advanced Sector/Block Protection - Top/Bottom Block Protection - Power Supply Lock Protection - 4x256 Byte Dedicated Security Area with OTP User-lockable Bits - 128 bit Unique ID for Each Device (Call Factory)
  • Industry Standard Pin-out & Packages(1)
  • - M =16-pin SOIC 300mil(2) - L = 8-contact WSON 8x6mm(2) - G = 24-ball TFBGA 6x8mm (4x6 ball array)(2) - H = 24-ball TFBGA 6x8mm (5x5 ball array)(2) Notes: 1. Call Factory for other package options available. 2. For optional 512 Byte Page size with 256 KB Block size, see the Ordering Information. - IS25LP512M: 512Mbit/64Mbyte - IS25WP512M: 512Mbit/64Mbyte - 3 or 4 Byte Addressing Mode - Supports Standard SPI, Fast, Dual, Dual I/O, Quad, Quad I/O, SPI DTR, Dual I/O DTR, Quad I/O DTR, and QPI - Software & Hardware Reset - Supports Serial Flash Discoverable Parameters (SFDP)
  • High Performance Serial Flash (SPI)
  • - 80MHz Normal Read - Up to133Mhz Fast Read - Up to 80MHz DTR (Dual Transfer Rate) - Equivalent Throughput of 532 Mb/s - Selectable Dummy Cycles - Configurable Drive Strength - Supports SPI Modes 0 and 3 - More than 100,000 Erase/Program Cycles - More than 20-year Data Retention
  • Flexible & Efficient Memory Architecture
  • - Chip Erase with Uniform Sector/Block Erase (4/32/64KB or 4/32/256 KB)(2) - Program 1 to 256 or 512 Byte per Page(2) - Program/Erase Suspend & Resume

概觀

The IS25LP512M and IS25WP512M Serial Flash memory offers a versatile storage solution with high flexibility and performance in a simplified pin count package. ISSI’s “Industry Standard Serial Interface” Flash is for systems that require limited space, a low pin count, and low power consumption. The device is accessed through a 4-wire SPI Interface consisting of a Serial Data Input (SI), Serial Data Output (SO), Serial Clock (SCK), and Chip Enable (CE#) pins, which can also be configured to serve as multi-I/O (see pin descriptions). The device supports Dual and Quad I/O as well as standard, Dual Output, and Quad Output SPI. Clock frequencies of up to 133MHz allow for equivalent clock rates of up to 532MHz (133MHz x 4) which equates to 66.5Mbytes/s of data throughput. The IS25xE series of Flash adds support for DTR (Double Transfer Rate) commands that transfer addresses and read data on both edges of the clock. These transfer rates can outperform 16-bit Parallel Flash memories allowing for efficient memory access to support XIP (execute in place) operation. The memory array is organized into programmable pages of 256/512 bytes. This family supports page program mode where 1 to 256/512 bytes of data are programmed in a single command. QPI (Quad Peripheral Interface) supports 2-cycle instruction further reducing instruction times. Pages can be erased in groups of 4Kbyte sectors, 32Kbyte blocks, 64K/256Kbyte blocks, and/or the entire chip. The uniform sector and block architecture allows for a high degree of flexibility so that the device can be utilized for a broad variety of applications requiring solid data retention. Item which must be waived from the initial Engineering Sample Initial Engineering sample does not meet below item in the specification, but it will be fixed in the production version.

 

相關IC编號

IC 編號 庫存數量 可用數量 IC 編號 庫存數量 可用數量
IS25LP512M-FHLA3 IS25LP512M-KHLE
IS25LP512M-FHLA3-TR IS25LP512M-KHLE-TR
IS25LP512M-FMLA3 IS25LP512M-KLLA3
IS25LP512M-FMLA3-TR IS25LP512M-KLLA3-TR
IS25LP512M-JGLA3 IS25LP512M-KMLA3
IS25LP512M-JGLA3-TR IS25LP512M-KMLA3-TR
IS25LP512M-JGLE IS25LP512M-KMLE
IS25LP512M-JGLE-TR IS25LP512M-KMLE-TR
IS25LP512M-JHLA3 IS25LP512M-PHLE
IS25LP512M-JHLA3-TR IS25LP512M-PHLE-TR
IS25LP512M-JHLE IS25LP512M-PMLE
IS25LP512M-JHLE-TR IS25LP512M-PMLE-TR
IS25LP512M-JLLA3 10,000 IS25LP512M-QHLA3
IS25LP512M-JLLA3-TR IS25LP512M-QHLA3-TR
IS25LP512M-JLLE 4,800 IS25LP512M-QHLE
IS25LP512M-JLLE-TR 4,000 IS25LP512M-QHLE-TR
IS25LP512M-JMLA3 IS25LP512M-QLLA3
IS25LP512M-JMLA3-TR IS25LP512M-QLLA3-TR
IS25LP512M-JMLE IS25LP512M-QLLE
IS25LP512M-JMLE-TR IS25LP512M-QLLE-TR
IS25LP512M-KGLA3 IS25LP512M-QMLA3
IS25LP512M-KGLA3-TR IS25LP512M-QMLA3-TR
IS25LP512M-KGLE IS25LP512M-QMLE
IS25LP512M-KGLE-TR IS25LP512M-QMLE-TR
IS25LP512M-KHLA3 IS25LP512M-RGLA3
IS25LP512M-KHLA3-TR
顯示全部 (74)