IS46LD32128A-18BPLA2-TR

容量 4G
規格 128Mx32
電壓 1.2/1.8V
類型 LPDDR2
刷新 8K
狀態 Prod
腳位數 PoP(168)
速度Mhz 533, 400, 333
評論上一篇
温度等级 A2 = Automotive Grade (-40°C to +105°C)
焊料類型 L = SnAgCu
Generation A = A
字數 128 = 128M
速度 18 = 533MHz
工作電壓範圍 LD = 1.2V - 1.8V LPDDR2
總線寬度 32 = x32
腳位/封裝 BP = PoP BGA
產品系列 46 = DDR/DDR2/DDR3/DDR4 Automotive grade
外包裝 Tape on Reel

IS46LD32128A-18BPLA2-TR 特徵

  • Low-voltage Core and I/O Power Supplies VDD2 = 1.14-1.30V, VDDCA/VDDQ = 1.14-1.30V, VDD1 = 1.70-1.95V
  • High Speed Un-terminated Logic(HSUL_12) I/O Interface
  • Clock Frequency Range : 10MHz to 533MHz (data rate range : 20Mbps to 1066Mbps per I/O)
  • Four-bit Pre-fetch DDR Architecture
  • Multiplexed, double data rate, command/ad- dress inputs
  • Eight internal banks for concurrent operation
  • Bidirectional/differential data strobe per byte of data (DQS/DQS#)
  • Programmable Read/Write latencies(RL/WL) and burst lengths(4,8 or 16)
  • ZQ Calibration
  • On-chip temperature sensor to control self re- fresh rate
  • Partial
    • array self refresh(PASR)
  • Deep power-down mode(DPD)
  • Operation Temperature Commercial (TC = 0°C to 85°C) Industrial (TC = -40°C to 85°C) Automotive, A1 (TC = -40°C to 85°C) Automotive, A2 (TC = -40°C to 105°C) options

概觀

Clock: CK and CK# are differential clock inputs. All Double Data Rate (DDR) CA inputs are sampled on both positive and negative edge of CK. Single Data Rate (SDR) inputs, CS# and CKE, are sampled at the positive Clock edge. Clock is defined as the differential pair, CK and CK#. The positive Clock edge is defined by the crosspoint of a rising CK and a falling CK#. The negative Clock edge is defined by the crosspoint of a falling CK and a rising CK#. Clock Enable: CKE HIGH activates and CKE LOW deactivates internal clock signals and therefore device input buffers and output drivers. Power savings modes are entered and exited through CKE transitions. CKE is considered part of the command code. See Command Truth Table for command code descriptions. CKE is sampled at the positive Clock edge. Chip Select: CS# is considered part of the command code. See Command Truth Table for command code descriptions. CS# is sampled at the positive Clock edge. DDR Command/Address Inputs: Uni-directional command/address bus inputs. CA is considered part of the command code. See Command Truth Table for command code descriptions. Data Inputs/Output: Bi-directional data bus.

 

相關IC编號

IC 編號 庫存數量 可用數量 IC 編號 庫存數量 可用數量
IS46LD32128A-18BPLA2 IS43LD32128A-25BPLI128M-TR
IS43LD32128A-18BPL 5,000 IS46LD32128A-18BPLA1
IS43LD32128A-18BPL-TR IS46LD32128A-18BPLA1-TR
IS43LD32128A-18BPLI128M IS46LD32128A-25BPLA1
IS43LD32128A-18BPLI128M-TR IS46LD32128A-25BPLA1-TR
IS43LD32128A-25BPL IS46LD32128A-25BPLA2 4 51
IS43LD32128A-25BPL-TR IS46LD32128A-25BPLA2-TR
IS43LD32128A-25BPLI128M