IS61QDB42M18A-333M3L-TR

容量 36M
規格 2Mx18
4
狀態 Prod
速度Mhz 250, 300, 333, 400
評論上一版本 IS61QDB42M18
配置 2M18 = 2M x18
ROHS版 L = Lead-free
突發類型 B4 = Burst 4
硅片版本 A = A
讀延時(RL) blank = 1.5 clock cycles or 2.5 clock cycles
產品類別 QD = QUAD
ODT選項 blank = No ODT
溫度範圍 blank = Commercial (0°C to 70°C)
速度 333 = 333MHz
產品系列 61 = QUAD/P DDR-2/P
包裝代碼 M3 = 165-ball BGA (15 x 17 mm)
外包裝 Tape on Reel

IS61QDB42M18A-333M3L-TR 特徵

  • 1Mx36 and 2Mx18 configuration available.
  • On-chip Delay-Locked Loop (DLL) for wide data valid window.
  • Separate independent read and write ports with concurrent read and write operations.
  • Synchronous pipeline read with late write operation.
  • Double Data Rate (DDR) interface for read and write input ports. 1.5 cycle read latency. Fixed 4-bit burst for read and write operations.
  • Clock stop support.
  • Two input clocks (K and K#) for address and control registering at rising edges only. Two output clocks (C and C#) for data output control. Two echo clocks (CQ and CQ#) that are delivered simultaneously with data. +1.8V core power supply and 1.5, 1.8V VDDQ, used with 0.75, 0.9V VREF.
  • Read/write address
  • Read enable
  • Write enable
  • Byte writes for burst addresses 1 and 3
  • Data-in for burst addresses 1 and 3 The following are registered on the rising edge of the K# clock:
  • Registered addresses, write and read controls, byte
  • Byte writes for burst addresses 2 and 4 writes, data in, and data outputs.
  • Full data coherency.
  • Boundary scan using limited set of JTAG 1149.1 functions.
  • Byte write capability.
  • Fine ball grid array (FBGA) package: 13mmx15mm and 15mmx17mm body size 165-ball (11 x 15) array
  • Programmable impedance output drivers via 5x user-supplied precision resistor.

概觀

The 36Mb IS61QDB41M36A and IS61QDB42M18A are synchronous, high-performance CMOS static random access memory (SRAM) devices. These SRAMs have separate I/Os, eliminating the need for high-speed bus turnaround. The rising edge of K clock initiates the read/write operation, and all internal operations are self-timed. Refer to the Timing Reference Diagram for Truth Table for a description of the basic operations of these QUAD (Burst of 4) SRAMs. Read and write addresses are registered on alternating rising edges of the K clock. Reads and writes are performed in double data rate. The following are registered internally on the rising edge of the K clock:

 

相關IC编號

IC 編號 庫存數量 可用數量 IC 編號 庫存數量 可用數量
IS61QDB42M18A-333M3L 10,000 IS61QDB42M18A-300M3
IS61QDB42M18A-250B4 IS61QDB42M18A-300M3-TR
IS61QDB42M18A-250B4-TR IS61QDB42M18A-300M3I
IS61QDB42M18A-250B4I IS61QDB42M18A-300M3I-TR
IS61QDB42M18A-250B4I-TR IS61QDB42M18A-300M3L 10,000
IS61QDB42M18A-250B4L IS61QDB42M18A-300M3L-TR
IS61QDB42M18A-250B4L-TR IS61QDB42M18A-300M3LI 10,000
IS61QDB42M18A-250B4LI IS61QDB42M18A-300M3LI-TR
IS61QDB42M18A-250B4LI-TR IS61QDB42M18A-333B4
IS61QDB42M18A-250M3 IS61QDB42M18A-333B4-TR
IS61QDB42M18A-250M3-TR IS61QDB42M18A-333B4I
IS61QDB42M18A-250M3I IS61QDB42M18A-333B4I-TR
IS61QDB42M18A-250M3I-TR IS61QDB42M18A-333B4L
IS61QDB42M18A-250M3L 10,000 IS61QDB42M18A-333B4L-TR
IS61QDB42M18A-250M3L-TR IS61QDB42M18A-333B4LI
IS61QDB42M18A-250M3LI 10,000 IS61QDB42M18A-333B4LI-TR
IS61QDB42M18A-250M3LI-TR IS61QDB42M18A-333M3
IS61QDB42M18A-300B4 IS61QDB42M18A-333M3-TR
IS61QDB42M18A-300B4-TR IS61QDB42M18A-333M3I 105
IS61QDB42M18A-300B4I IS61QDB42M18A-333M3I-TR
IS61QDB42M18A-300B4I-TR IS61QDB42M18A-333M3LI 10,000
IS61QDB42M18A-300B4L IS61QDB42M18A-333M3LI-TR
IS61QDB42M18A-300B4L-TR IS61QDB42M18A-400B4
IS61QDB42M18A-300B4LI IS61QDB42M18A-400B4-TR
IS61QDB42M18A-300B4LI-TR IS61QDB42M18A-400B4I
顯示全部 (65)